LiI measurement campaign

• From LiI_SelfTrigger_HV_750V_UG_Thermal_20240530_205303.root to LiI_SelfTrigger_HV_750V_UG_Thermal_20240627_112642.root
  Partly good, 30 min, DAQ crashing randomly because we used the wrong USB port on the DAQ laptop. Only files with an actual 30 min duration are usable.
• From LiI_SelfTrigger_HV_750V_UG_Am_20240703_180931.root to LiI_SelfTrigger_HV_750V_UG_Am_20240709_150126.root
  Partly good, 30 min, Am source placed in front of the crystal, DAQ crashing randomly because we used the wrong USB port on the DAQ laptop. Only files with an actual 30 min duration are usable.

The signal is amplified by a factor x10, and with a low-pass filter (the bandwidth should be 100 Mhz).

• Gamma calibration
  LiI_SelfTrigger_HV_750V_UG_Am_AmpX10filtered_20240709_172221.root
  Good, 2 min long, threshold automatically set at 50 RMS. 59.6 keV gamma line from 241 Am clearly visible.
• Thermal data
  From LiI_SelfTrigger_HV_750V_UG_Thermal_AmpX10filtered_20240709_172804.root to LiI_SelfTrigger_HV_750V_UG_Thermal_AmpX10filtered_20240729_111050.root
  Good, 30 min long, threshold automatically set at 50 RMS.
• From LiI_SelfTrigger_HV_750V_UG_Thermal_AmpX10filtered_Resampled_20240729_162843.root
  Good, 3 hour long, threshold automatically set at 50 RMS, waveforms resampled by a factor 10 before being written to disk. The sampling time of the saved data is 40ns.
• Gamma calibration
  Runs LiI_SelfTrigger_HV_750V_UG_Am_AmpX10filtered_20240730_144523.root, LiI_SelfTrigger_HV_800V_UG_Am_AmpX10filtered_20240730_145955.root, LiI_SelfTrigger_HV_700V_UG_Am_AmpX10filtered_20240730_151645.root
  Good, few minutes long, various thresholds, with Am source in front of detector, 24 us waveforms resampled by factor 20.
• Gamma calibration
  Runs LiI_750V_UG_Th_AmpX10filtered_Resampled_24us_20240730_143522.root and LiI_750V_UG_Th_AmpX10filtered_Resampled_24us_20240730_152506.root
  Good, 5 min long, threshold at 50 RMS, 24 us waveforms resampled by factor 20, source in front of the detector (first run) and laterally to increase full absorption rate (second run).
• Neutron calibration
  • Runs LiI_750V_UG_AmBe_5cmPE_2cmPb_AmpX10filtered_Resampled_24us_20240730_120902.root and iI_750V_UG_AmBe_5cmPE_2cmPb_AmpX10filtered_Resampled_24us_20240730_121905.root
    Good, taken with 5cm PE moderator and 2cm Pb shield between AmBe source and crystal.
  • Runs LiI_750V_UG_AmBe_5cmPE_AmpX10filtered_Resampled_24us_20240730_123225.root to LiI_750V_UG_AmBe_5cmPE_AmpX10filtered_Resampled_24us_20240730_135326.root
    Good, taken with 5cm PE moderator and additional 2cm of space between AmBe source and crystal (same distance as for previous runs).
  • Runs LiI_750V_UG_AmBe_noPE_AmpX10filtered_Resampled_24us_20240730_154039.root to LiI_750V_UG_AmBe_noPE_AmpX10filtered_Resampled_24us_20240730_162919.root
    Good, 5cm distance between AmBe source and detector, no PE moderator.
    
  • Runs LiI_750V_UG_AmBe_1cmPE_AmpX10filtered_Resampled_24us_20240730_164445.root to LiI_750V_UG_AmBe_1cmPE_AmpX10filtered_Resampled_24us_20240730_173107.root
    Good, 5cm distance between AmBe source and detector, 1cm moderator.
    
  • Runs LiI_750V_UG_AmBe_2cmPE_AmpX10filtered_Resampled_24us_20240730_174825.root to LiI_750V_UG_AmBe_2cmPE_AmpX10filtered_Resampled_24us_20240730_182601.root
    Good, 5cm distance between AmBe source and detector, 2cm moderator.
    
  • Runs LiI_750V_UG_AmBe_3cmPE_AmpX10filtered_Resampled_24us_20240731_091333.root to LiI_750V_UG_AmBe_3cmPE_AmpX10filtered_Resampled_24us_20240731_095400.root
    Good, 5cm distance between AmBe source and detetor, 3cm moderator.
    
  • Runs LiI_750V_UG_AmBe_4cmPE_AmpX10filtered_Resampled_24us_20240731_100342.root to LiI_750V_UG_AmBe_4cmPE_AmpX10filtered_Resampled_24us_20240731_104723.root
    Good, 5cm distance between AmBe source and detector, 4cm moderator.
    
  • Runs ''